Terms & Conditions

NORNIR AS, STANDARD TERMS AND CONDITIONS OF SALE for EVALUATION KITS or MODULES (EVK). That are neither intended nor marketed for consumer or residential use

Nornir Academy offers to sell and deliver the evaluation kit or modules, in accordance with the terms and conditions set forth herein. Acceptance of this offer is expressly limited to such terms. Nornir Academy hereby objects to and rejects any additional or different terms proposed by Buyer, including those contained in Buyer’s purchase order. The EVK or modules are intended to help Nornir Academy customers evaluate the suitability of certain Nornir AS Technology for use in their more complete system designs and 1. Offer and Acceptance: is not to be incorporated into final products for sale. For clarification, any software or software tools provided with the EVK (“Software”) shall not be subject to the terms and conditions set forth herein but rather shall be subject to the applicable terms and conditions (the “Software Agreement”) that accompany such Software.


2. Eval Kit Use Restrictions and Notices:

2.1 Buyer acknowledges and agrees to all the terms of the additional information and warnings from Nornir Academy listed on Nornir Academy‘s Website or within the EVK documentation downloadable from Nornir Academy website.


2.2  Special terms applicable to EVKs designated as NOT FCC approved / FCC NOTICE: This EVK has NOT been authorized under the rules of the Federal Communications Commission, and may not be offered for further sale or lease, or sold or leased until authorization is obtained. FCC experimental licensing requirements may apply to Buyer’s use of this EVK. This EVK is made available solely to allow product developers to evaluate Nornir AS  technology, and/or software associated with the kit to determine whether to incorporate such items in a finished product. This is not a finished product and when assembled may not be resold or otherwise marketed unless all required FCC equipment authorizations are first obtained. The operation is subject to the conditions that this EVK does not cause harmful interference to licensed radio stations and that this EVK accept harmful interference. Unless the assembled kit is designed to operate under Part 15 or Part 95 of the FCC Rules, the operator of the kit must operate under the authority of an FCC license holder or must secure an experimental authorization under Part 5 of the FCC Rules. This EVK is not an end product or finished appliance; and is not intended or authorized to be integrated into end products as is. Buyer may use the EVK to create prototypes for its own internal experimental use and may add components, features, software and/or functionality, in the process of designing its own final products. Buyer shall only assign technically qualified electronics experts who are familiar with the dangers and application risks associated with handling electrical mechanical components, subsystems, and systems to use the EVK, and that such use takes place solely in laboratory/development environments (and not in residential environments). Non-FCC approved Eval Kits are FOR ENGINEERING DEVELOPMENT, DEMONSTRATION, AND/OR EVALUATION PURPOSES ONLY.


2.3  Special terms applicable to EVKs designated as FCC-Approved: If this EVK has been designated as FCC-Approved, then it complies with Part 15 of the FCC Rules. The operation is subject to the following two conditions: (1) This EVK may not cause harmful interference, and (2) this EVK must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.



2.4  Safety-Related Warnings and Restrictions. Buyer assumes all responsibility and liability for proper and safe handling of this EVK. Before handling or using this EVK, Buyer shall read the applicable User’s Guide and observe the Warnings and Restrictions included in such User’s Guide. The User’s Guide contains important safety information about temperatures and voltages. If operating ranges are provided in the User’s Guide, then it is important that Buyer operate the EVK within such ranges. Among other things, Buyer will be responsible to take whatever measures may be required to correct any interference with radio communications, at its own expense, if such measures are necessary. Also, this EVK is not to be used for medical treatment or diagnosis. Further, Buyer is responsible for ensuring that any contacts or interfaces between the EVK and any human body are designed to be safe and to avoid the risk of electrical shock. Failure to operate this EVK within Nornir Academy’s recommended specifications and environmental considerations per the instructions in the EVK User’s Guide may present the risk of personal injury, property damage and/or unexpected operation of the EVK. During normal operation within the EVK’s recommended ratings, some circuit components, including but not limited to linear regulators, switching transistors, pass transistors, current sense resistors, and heat sinks may have elevated case temperatures or contain voltages exceeding safe touch levels. The EVK User’s Guide includes a schematic drawing which identifies such components. When placing measurement probes near or on these EVKs during operation for evaluation purposes, precautions should be taken against inadvertent contact with surfaces of elevated temperatures and/or voltages exceeding safe touch levels.


2.5  Warnings and Restrictions Related to Buyer’s End Products. If Buyer designs and/or produces end products or subassemblies for incorporation into end products, then Buyer acknowledges, represents and agrees that it has unique knowledge concerning the Federal, State and local regulatory requirements (including but not limited to Food and Drug Administration regulations, if applicable) which relate to its products and which relate to its use (and/or that of its employees, affiliates, contractors or designees) of the EVK for evaluation, testing and other purposes. Notwithstanding any design support or recommendations that Nornir Academy may provide, Buyer is solely responsible for its end product or subassembly, and for providing “fail-safe” mechanisms and/or other safety measures as may be necessary or appropriate in any potentially hazardous applications, in light of the possibility of failure of semiconductor components.


Tel: +47 482 01 265

Visiting: Christian Krogs gate 1,


  • LinkedIn Social Icon
  • Facebook Social Icon
  • YouTube Social  Icon